Klarstein VAPOAIR Mode D'emploi page 16

EN
16
Humidity control
• No matter in any working mode, when the environment humidity reaches 90%, the
machine will be in sleeping state. When the environment humidity is under 85%, the
machine will work again.
Display shut-off
• No matter in any working mode, if no any operation in about 15 seconds, the
display will turn dim.
Remote control (Batteries are not included in the scope of delivery.)
• On the remote controller, the related symbol controls the corresponding function,
except the water tank light. Water tank light cannot control by it.
How to insert the remote control batteries
1. Flip the remote on its side.
2. Press the battery release on the bottom edge of the remote.
3. Grasp the battery socket and pull the battery out.
4. Insert a lithium battery type CR2025.
2
1
CLEANING
We recommend:
1. Use cold boiled water or distilled water.
2. Clean the transducer, water tank and basin unit every week.
3. Change the water in water tank more often to keep it fresh.
4. Make sure to pull out the water from the water tank and dry the water basin before
you store the unit unused for a long period of time.
5. Clean the whole unit and make sure that all parts of the unit are dried completely
before unused for longer period of time.
How to clean the transducer
1. Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5
minutes.
2. Brush off the scale from the surface.
CR2025