Humidity Control - Klarstein VAPOAIR Mode D'emploi

the first speed. You may select 3 desired levels of mist volume. The corresponding
pillar symbol will appear on the display. 1 pillar: Low 2 pillars: Medium 3pillars:
High. Touch the symbol again, to choose AUTO mode. On the remote control, it is
the same.
Iionizer
Touch the symbol , the Anion generator works. On the LED display, it shows the shape
of trees. Touch again to stop the function.
Light
Long-press the symbol
Heating
Touch the symbol , the warm mist will come out after 10~15 minutes. On the LED
display, it shows the same symbol
cool.

Humidity control

Constant humidity: Before you touch the symbol
humidity. You may set the humidity arranged from 30%RH to 75%RH. Touch once, it will
increase by 5%RH. The When it reaches 75%RH, touch again, it will show "Co" and
flash for 3 seconds to exit humidity setting function. After you set the expected humidity,
the machine will keep the memory and confirm after 5 seconds. 5 seconds later, LED
display shows the current humidity. Touch again, it shows the expected humidity setting.
If the expected humidity is less than the current humidity, the machine will be in sleeping
state. But if the expected humidity is higher than the current humidity, the humidify
function will work.
Timer Setting
There are 12 timer setting: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1 1, 12 hours. Touch the symbol
TIMER l . The LED display will show the desired timer setting. Touch until "Co" is
displayed on the LED. The timer setting is cancelled. The timer shows the remaining
time of operation and decreases by 1 hour, i.e., if the timer is set for 12 hours, the LED
display shows 1 1 after one hour. Touch TIMER symbol to see what time has been set.
Touch again to set timer again.
Auto Shut-Off
Once the water in the basin is too little to keep the machine working, the machine will
automatically stop working. LED shows the shape of lack of water
and the machine will restart. If don't refill water within 15 minutes, the machine will
automatically power off.
, it can also control the water tank light switching on or off.
. Touch again to stop the function. Mist will become
, LED display shows the current
. Refill the water,
EN
15