Data And Models - Oregon 590181 Manuel D'instructions

Table des Matières

Les langues disponibles

ENGLISH

A copy of this manual is delivered with each grinder.

ENGLISH

NB: The descriptions and illustrations contained in this manual are not binding. The manufacturer reserves the right to bring about

any modifications without updating this manual.

ELECTRICAL CHAIN GRINDER FOR SAWS

230 Volt

MINIGRINDER 230Vac

CHARACTERISTICS OF THE MACHINE:

A copy of this manual is delivered with each grinder.

- Manufacturer: Tecomec SpA - Via Secchi, 2 - 42011 Bagnolo in Piano - Reggio Emilia - ITALY

Tecomec

A copy of this manual is delivered with each grinder.

NB: The descriptions and illustrations contained in this manual are not binding. The manufacturer reserves the right to bring about

- Machine: Electrical chain grinder MINIGRINDER 106550 230Vac for saws

NB: The descriptions and illustrations contained in this manual are not binding. The manufacturer reserves the right to bring about

any modifications without updating this manual.

DATA AND MODELS:

ELECTRICAL CHAIN GRINDER FOR SAWS

- models: MINIGRINDER 106550 230Vac

ELECTRICAL CHAIN GRINDER FOR SAWS

MINIGRINDER 230Vac

- installed power: electrical motor 50Hz 85

MINIGRINDER 230Vac

- insulation class II

CHARACTERISTICS OF THE MACHINE:

- grinding wheel dimensions: outside diameter105mm, inside diameter 22.3mm

- Manufacturer: Tecomec SpA - Via Secchi, 2 - 42011 Bagnolo in Piano - Reggio Emilia - ITALY

CHARACTERISTICS OF THE MACHINE:

Tecomec

- Manufacturer: Tecomec SpA - Via Secchi, 2 - 42011 Bagnolo in Piano - Reggio Emilia - ITALY

- thickness: 3.2 - 4.7 - 6mm

Tecomec

- Manufacturer: Tecomec SpA - Via Secchi, 2 - 42011 Bagnolo in Piano - Reggio Emilia - ITALY

- Machine: Electrical chain grinder MINIGRINDER 106550 230Vac for saws

Tecomec

7000

- maximum speed: 5000 min

- Machine: Electrical chain grinder MINIGRINDER 106550 230Vac for saws

54.1dB (A)

- sound pressure level: 76dB (A)

DATA AND MODELS:

- level of vibrations transmitted to the handle: < 2,5 m/S

DATA AND MODELS:

- models: MINIGRINDER 106550 230Vac

- The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one

- type of chains: pitches – 1/4" .325" – 3/8" - .404" – 1/2"

- models: MINIGRINDER 106550 230Vac

- weight of the complete machine: 19.6N (2 kg)

- installed power: electrical motor 50Hz 85

tool with another.

- installed power: electrical motor 50Hz 85

- The declared vibration total value may also be used in a preliminary assessment of exposure.

- accessories provided: 1 wheel (thickness: 4.7mm), 1 wheel guard, 1 dressing stone; 1 template ; 1 handle. 1 screw M6x25

- insulation class II

- installed power: electrical motor 50Hz 85

- insulation class II

- grinding wheel dimensions: outside diameter105mm, inside diameter 22.3mm

- insulation class II

- grinding wheel dimensions: outside diameter105mm, inside diameter 22.3mm

- the vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the

- thickness: 3.2 - 4.7 - 6mm

- grinding wheel dimensions: outside diameter105mm, inside diameter 22.3mm

INTRODUCTION:

- thickness: 3.2 - 4.7 - 6mm

tool is used; and of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual

- maximum speed: 5000 min

Keep this manual with care.

- thickness: 3.2 - 4.7 - 6mm

- maximum speed: 5000 min

conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running

To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this manual carefully. This

- sound pressure level: 76dB (A)

- maximum speed: 5000 min

- sound pressure level: 76dB (A)

idle in addition to the trigger time).

- level of vibrations transmitted to the handle: < 2,5 m/S

- sound pressure level: 76dB (A)

manual explains the operation of the machine components and provides instructions for carrying out the checks and maintenance required.

- level of vibrations transmitted to the handle: < 2,5 m/S

- type of chains: pitches – 1/4" .325" – 3/8" - .404" – 1/2"

- level of vibrations transmitted to the handle: < 2,5 m/S

- type of chains: pitches – 1/4" .325" – 3/8" - .404" – 1/2"

- weight of the complete machine: 19.6N (2 kg)

- type of chains: pitches – 1/4" .325" – 3/8" - .404" – 1/2"

WARNING – Any maintenance operations not described in this manual shall only be carried out by an authorized service center. To

- weight of the complete machine: 19.6N (2 kg)

guarantee the efficient and consistent operation of your grinder, worn or broken parts shall only be replaced using ORIGINAL SPARE

- accessories provided: 1 wheel (thickness: 4.7mm), 1 wheel guard, 1 dressing stone; 1 template ; 1 handle. 1 screw M6x25

PARTS

1 wheel (thickness: 3.2mm); 1 screw Ø3,5x9,5

INTRODUCTION:

Keep this manual with care.

INTRODUCTION:

SAFETY RULES:

Keep this manual with care.

To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this manual carefully. This

Keep this manual with care.

To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this manual carefully. This

manual explains the operation of the machine components and provides instructions for carrying out the checks and maintenance required.

To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this manual carefully. This

WARNING – When correctly used, your grinder is a fast, easy, and efficient work tool. For pleasant and safe working, carefully comply

manual explains the operation of the machine components and provides instructions for carrying out the checks and maintenance required.

with the safety rules listed below and as well as with those provided throughout this manual

WARNING – Any maintenance operations not described in this manual shall only be carried out by an authorized service center. To

1. The grinder shall only be used by adults. Users shall be in good physical condition and familiar with the instructions for use.

WARNING – Any maintenance operations not described in this manual shall only be carried out by an authorized service center. To

guarantee the efficient and consistent operation of your grinder, worn or broken parts shall only be replaced using ORIGINAL SPARE

WARNING – Any maintenance operations not described in this manual shall only be carried out by an authorized service center. To

2. Never wear rings, bracelets and/or loose clothing that could come into contact with the grinding wheel.

guarantee the efficient and consistent operation of your grinder, worn or broken parts shall only be replaced using ORIGINAL SPARE

PARTS

3. Always wear gloves and protective eyewear while operating the grinder and while sharpening the wheel.

PARTS

4. Never stop the grinding wheel with your hands, even after stopping the motor.

SAFETY RULES:

5. Check that the plug is disconnected when fitting the grinding wheel and during maintenance or transport.

SAFETY

SAFETY RULES:

6. Never start the grinder without the wheel guard in place. The guard is supplied together with the accessories' bag and must be installed

ATTENTION! When you use electrical machines, you should always observe basic safety precautions to reduce the risk of fire,

WARNING – When correctly used, your grinder is a fast, easy, and efficient work tool. For pleasant and safe working, carefully comply

after assembling the wheel (photo 6). The guard can be removed only while the wheel is being replaced; then, it must be reinstalled.

WARNING – When correctly used, your grinder is a fast, easy, and efficient work tool. For pleasant and safe working, carefully comply

electric shocks and personal injuries.

with the safety rules listed below and as well as with those provided throughout this manual

WARNING – When correctly used, your grinder is a fast, easy, and efficient work tool. For pleasant and safe working, carefully comply

7. Check that the voltage and frequency indicated on the grinder tag correspond to the mains values.

with the safety rules listed below and as well as with those provided throughout this manual

1. The grinder shall only be used by adults. Users shall be in good physical condition and familiar with the instructions for use.

8. Never use defective and/or non-standard cables, plugs or extension cables.

- Do not leave the machine out in the rain.

1. The grinder shall only be used by adults. Users shall be in good physical condition and familiar with the instructions for use.

2. Never wear rings, bracelets and/or loose clothing that could come into contact with the grinding wheel.

9. Remove the plug from the mains immediately if the cable is damaged or cut. For cable repair or replacement, contact your authorized

1. The grinder shall only be used by adults. Users shall be in good physical condition and familiar with the instructions for use.

- Do not use the machine in damp or wet places.

2. Never wear rings, bracelets and/or loose clothing that could come into contact with the grinding wheel.

3. Always wear gloves and protective eyewear while operating the grinder and while sharpening the wheel.

dealer or service center. The power supply cable is complete with terminals. For internal electrical connection insert the deeding cable

- Keep the work area well lit.

3. Always wear gloves and protective eyewear while operating the grinder and while sharpening the wheel.

4. Never stop the grinding wheel with your hands, even after stopping the motor.

3. Always wear gloves and protective eyewear while operating the grinder and while sharpening the wheel.

terminals directly in the switch. The electrical connection to the mains shall be made in order to prevent damages by people or vehicles

- Do not use the machine near flammable liquids or gas.

4. Never stop the grinding wheel with your hands, even after stopping the motor.

5. Check that the plug is disconnected when fitting the grinding wheel and during maintenance or transport.

which could endanger both their safety and yours.

- Make sure the voltage and the frequency written on the rating

5. Check that the plug is disconnected when fitting the grinding wheel and during maintenance or transport.

10. Before starting up the grinder, check that the working area is free of tools or other objects.

6. Never start the grinder without the wheel guard in place. The guard is supplied together with the accessories' bag and must be installed

5. Check that the plug is disconnected when fitting the grinding wheel and during maintenance or transport.

nameplate match those of the mains.

6. Never start the grinder without the wheel guard in place. The guard is supplied together with the accessories' bag and must be installed

after assembling the wheel (photo 6). The guard can be removed only while the wheel is being replaced; then, it must be reinstalled.

11. Check the cable position during operation, making sure that it remains outside the grinding wheel operating area and that it is not

6. Never start the grinder without the wheel guard in place. The guard is supplied together with the accessories' bag and must be installed

- Make sure the switch is turned off (pos. 0) before you plug the

after assembling the wheel (photo 6). The guard can be removed only while the wheel is being replaced; then, it must be reinstalled.

7. Check that the voltage and frequency indicated on the grinder tag correspond to the mains values.

after assembling the wheel (photo 6). The guard can be removed only while the wheel is being replaced; then, it must be reinstalled.

energized. Never work near other electrical cables.

machine into the mains to prevent it from starting up accidentally.

7. Check that the voltage and frequency indicated on the grinder tag correspond to the mains values.

12. Never advance the chain with your hands until the grinding wheel has moved entirely outside the working area.

8. Never use defective and/or non-standard cables, plugs or extension cables.

7. Check that the voltage and frequency indicated on the grinder tag correspond to the mains values.

- Unplug the machine from the mains when it is not in use, before

8. Never use defective and/or non-standard cables, plugs or extension cables.

9. Remove the plug from the mains immediately if the cable is damaged or cut. For cable repair or replacement, contact your authorized

13. Do not allow other people to remain near the grinder during its operation or to touch its supply cable.

8. Never use defective and/or non-standard cables, plugs or extension cables.

you start any maintenance jobs and when you replace any

9. Remove the plug from the mains immediately if the cable is damaged or cut. For cable repair or replacement, contact your authorized

14. Always keep the hand-grips clean and dry.

9. Remove the plug from the mains immediately if the cable is damaged or cut. For cable repair or replacement, contact your authorized

dealer or service center. The power supply cable is complete with terminals. For internal electrical connection insert the deeding cable

accessories (i.e. grinding wheel).

dealer or service center. The power supply cable is complete with terminals. For internal electrical connection insert the deeding cable

15. Before starting the grinder, check that the grinding wheel is correctly secured and out of the working area.

terminals directly in the switch. The electrical connection to the mains shall be made in order to prevent damages by people or vehicles

dealer or service center. The power supply cable is complete with terminals. For internal electrical connection insert the deeding cable

- Before you actually use the machine, make sure it is able to work

terminals directly in the switch. The electrical connection to the mains shall be made in order to prevent damages by people or vehicles

which could endanger both their safety and yours.

16. Always work in a stable and safe position, and be particularly careful.

appropriately and efficiently: check the integrity of the shield

which could endanger both their safety and yours.

17. Always work with the machine fastened on a bench or to a wall.

10. Before starting up the grinder, check that the working area is free of tools or other objects.

which could endanger both their safety and yours.

guard in particular.

10. Before starting up the grinder, check that the working area is free of tools or other objects.

18. Always comply with maintenance instructions.

11. Check the cable position during operation, making sure that it remains outside the grinding wheel operating area and that it is not

- Check the alignment and adherence of moving parts, make sure

11. Check the cable position during operation, making sure that it remains outside the grinding wheel operating area and that it is not

19. Before using the grinder, check that all safety (and other) devices are properly working.

11. Check the cable position during operation, making sure that it remains outside the grinding wheel operating area and that it is not

energized. Never work near other electrical cables.

nothing is broken, check the overall assembly and any other

energized. Never work near other electrical cables.

20. Never work with a damaged, improperly repaired/ fitted or arbitrarily modified grinder. Do not remove, damage, or neutralize any

12. Never advance the chain with your hands until the grinding wheel has moved entirely outside the working area.

energized. Never work near other electrical cables.

conditions that may affect operation.

12. Never advance the chain with your hands until the grinding wheel has moved entirely outside the working area.

13. Do not allow other people to remain near the grinder during its operation or to touch its supply cable.

safety devices.

- The grinding wheel safety guards and any other parts damaged

13. Do not allow other people to remain near the grinder during its operation or to touch its supply cable.

14. Always keep the hand-grips clean and dry.

21. Use only the grinding wheels specified in the chain table at the end of the handbook (columns I and L)

14. Always keep the hand-grips clean and dry.

shall be repaired or replaced by a skilled technician, unless

15. Before starting the grinder, check that the grinding wheel is correctly secured and out of the working area.

14. Always keep the hand-grips clean and dry.

22. Never use the grinder as a cutter or for grinding objects other than saw chains.

specified otherwise in this manual.

15. Before starting the grinder, check that the grinding wheel is correctly secured and out of the working area.

16. Always work in a stable and safe position, and be particularly careful.

15. Before starting the grinder, check that the grinding wheel is correctly secured and out of the working area.

23. Deliver or lend your grinder only to expert users who are familiar with its operation and correct use.

- Have faulty switches replaced by a skilled technician.

16. Always work in a stable and safe position, and be particularly careful.

17. Always work with the machine fastened on a bench or to a wall.

16. Always work in a stable and safe position, and be particularly careful.

24. Store your grinder in a dry place, raised off the ground. Keep it away from children.

- Keep anyone that is not involved in the job well away from

17. Always work with the machine fastened on a bench or to a wall.

18. Always comply with maintenance instructions.

17. Always work with the machine fastened on a bench or to a wall.

25. Damage risk, caused by accidental start-up. Do not use in a place where children may be present.

18. Always comply with maintenance instructions.

the work area, especially children. Do not let them touch the

19. Before using the grinder, check that all safety (and other) devices are properly working.

18. Always comply with maintenance instructions.

26. The grinder can be used continuously for no more than 15 minutes; then, turn it off for an adequate period of time.

19. Before using the grinder, check that all safety (and other) devices are properly working.

machine or the extension lead.

20. Never work with a damaged, improperly repaired/ fitted or arbitrarily modified grinder. Do not remove, damage, or neutralize any

19. Before using the grinder, check that all safety (and other) devices are properly working.

27. Never let your grinder in the rain, in wet environments, or in any place accessible to children.

20. Never work with a damaged, improperly repaired/ fitted or arbitrarily modified grinder. Do not remove, damage, or neutralize any

- Wear safety goggles and gloves.

28. Never expose your grinder in explosive or inflammable atmosphere.

20. Never work with a damaged, improperly repaired/ fitted or arbitrarily modified grinder. Do not remove, damage, or neutralize any

safety devices.

- Wear a face mask or dust mask if the process creates dust.

21. Use only the grinding wheels specified in the chain table at the end of the handbook (columns I and L)

29. When your grinder can no longer be used, do not abandon it. Take it to your dealer who will store or dispose of it correctly.

safety devices.

21. Use only the grinding wheels specified in the chain table at the end of the handbook (columns I and L)

- Do not wear baggy clothing or jewelry, which could get caught up

22. Never use the grinder as a cutter or for grinding objects other than saw chains.

21. Use only the grinding wheels specified in the chain table at the end of the handbook (columns I and L)

30. Always refer to your dealer for any explanations or important maintenance or servicing.

22. Never use the grinder as a cutter or for grinding objects other than saw chains.

in moving parts.

31. Never jerk the cable to disconnect it from the outlet. Keep the cable away from heat, oil, and sharp objects.

22. Never use the grinder as a cutter or for grinding objects other than saw chains.

23. Deliver or lend your grinder only to expert users who are familiar with its operation and correct use.

- Wear a protection cap and tie long hair back.

24. Store your grinder in a dry place, raised off the ground. Keep it away from children.

23. Deliver or lend your grinder only to expert users who are familiar with its operation and correct use.

24. Store your grinder in a dry place, raised off the ground. Keep it away from children.

- Wear non-slip shoes when working outdoors.

25. Damage risk, caused by accidental start-up. Do not use in a place where children may be present.

24. Store your grinder in a dry place, raised off the ground. Keep it away from children.

25. Damage risk, caused by accidental start-up. Do not use in a place where children may be present.

- Always stand appropriately and balanced on both feet.

26. The grinder can be used continuously for no more than 15 minutes; then, turn it off for an adequate period of time.

25. Damage risk, caused by accidental start-up. Do not use in a place where children may be present.

26. The grinder can be used continuously for no more than 15 minutes; then, turn it off for an adequate period of time.

- Always keep your eyes on the job, without distraction. Use your