SilverCrest SHC 240 A1 Mode D'emploi page 26

4) Press the rotation direction button
has been set:
Curling direction
indicator
5) Press the turn button
set number from the turns indicator 5 . The number of turns depends on the
length of the hair:
Number of turns
NOTE
► The diameter/size of the curls is always the same!
6) Depending on the nature of your hair and the desired intensity of the curls,
select the time for which the strand of hair is to stay on the roller 2 and be
heated .
For gentle waves, select a short time . For tighter curls, choose the longest
possible time . Bear in mind that thick hair needs a longer time than fine hair
to achieve the same result .
To set the time, press the time button
appears on the time indicator 4 .
Selectable time
You have now made all required settings . You can change the settings at any
time by pressing the relevant button if you ascertain that the time/temperature/
turning speed is not ideal for your hair .
SHC 240 A1
6
RIGHT
LEFT
AUTO
e to set the number of turns You can read off the
5–7
8–10
11–12
3–12 seconds
t until the desired curling direction
Curl direction
The curls are always turned
in a clockwise direction
The curls are always turned in an
anticlockwise direction
The curls are turned alternately in a
clockwise and anticlockwise direction
Hair length
approx . 20–30 cm
30–50 cm
> 50 cm
q repeatedly until the desired time
Temperature
130°C–230°C
GB │ IE 23 ■
│