Cleaning The Nozzle - LG A90 Série Manuel Du Propriétaire

us_main.book.book Page 22 Tuesday, December 15, 2020 3:58 PM
22 MAINTENANCE
4
Use the combination tool
off the motor.
• Do not wash the motor with water.
5
Clean the exhuast filter by brushing the dust
off it regularly and wash it in running water at
least once a month.
• To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6
Clean the pre-filter by brushing the dust off it
regularly and wash it in running water at least
once a month.
• To avoid odor and the malfunction of the
motor, allow the pre-filter to dry completely
in a well-ventilated area out of direct
7
to clean any dust
d
• Do not use the appliance without the exhaust

Cleaning the Nozzle

Clean the nozzle and rotating brush regularly.
• Always separate the nozzle from the product
• Keep fingers away from pinch points when
• Do not use the rotating brush as a wet mop. It
Cleaning the Universal/Hard Floor
Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
sunlight for at least 24 hours before
reassembling.
Insert the clean, dry pre-filter and rotate the
exhaust filter to the locked position
reassemble it on the product body.
CAUTION
filter and pre-filter installed. Doing so could
result in product damage.
CAUTION
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
may cause product damage.
may not spin or a noise may occur during
operation.
to
e