Using The Nozzles And Tools - LG A90 Série Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

us_main.book.book Page 18 Tuesday, December 15, 2020 3:58 PM
18 OPERATION
WARNING
• Make sure to securely fit the product body onto
the charging station. If the appliance falls off the
charging station, it could cause injuries, property
damage or product damage.
Charging the Auxiliary Battery
An auxiliary battery can be stored and charged in
the base of the charging station.
CAUTION
• Keep fingers away from pinch points when
assembling or disassembling the battery from
the product body or the charging station to
avoid personal injury.
1
Remove the discharged battery from the
product body by pressing the battery release
button on either side of the battery and
pulling.
2
Insert the discharged battery into the
auxiliary charging station.
• The battery will only fit into the cavity if
aligned properly.
• The auxiliary charging indicator blinks while
recharging is in progress.
• The auxiliary charging indicator lights up
when charging is complete.

Using the Nozzles and Tools

Some accessories are only available on some
models.
Specialized attachments can help you clean more
effectively. Tools and nozzles can be attached to
the product body or the extension pipe.
• Adjust the suction power if the inlet gets stuck
on the floor, carpet, or bedding.
• Each Nozzle is equipped with a motor and may
make a sound when operating.
CAUTION
• Do not use the Slim Hard Floor Nozzle or
Universal Nozzle on PVC or polyurethane mats
for infants and children. The mat may stick to the
nozzle, making it difficult to operate, causing
damage to the mat or static electricity on the
appliance. Clean mats using the crevice tool.
Universal Nozzle
Use this nozzle to clean carpets or rugs.
• If used on hard flooring, this nozzle will be noisy.
Hard Floor Nozzle
Use this nozzle to clean hard floor surfaces.
Bedding Nozzle
This nozzle lets you clean sheets and bedding
more effectively. It removes dust in bedding using
strong suction and a punching motion.
• Lower the suction level when vacuuming
bedding such as duvet covers to avoid the thin
fabric getting sucked into the nozzle.
Crevice Tool
Use this tool to remove dust from corners or
narrow spaces.
• Use it for areas with static electricity such as
mats.

Publicité

Chapitres

Table des Matières
loading

Table des Matières