Horizon Fitness HT5.0 PEAK TRAINER Mode D'emploi page 15

Masquer les pouces Voir aussi pour HT5.0 PEAK TRAINER:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
WHAT KIND OF ROUTINE
MAINTENANCE IS REQUIRED?
Minimal maintenance and cleaning is
required. Adhering to this schedule will
extend the life of your machine.
HOW DO I CLEAN MY EQUIPMENT?
Clean with soap and water cleaners only. Never
use solvents on plastic parts. Cleanliness of
your equipment and its operating environment
will keep maintenance problems and service
calls to a minimum. For this reason, it is
recommended that the following preventive
maintenance schedule be followed.
WARNING
To remove power from the equipment, the power
cord must be disconnected from the wall outlet.
MAINTENANCE SCHEDULE
ACTION
Clean the equipment:
• Turn off the equipment by unplugging
the power cord from the wall outlet.
• Wipe down the equipment with a damp
cloth. Never use solvents, as they can
cause damage to the equipment.
• Inspect the power cord. If the power
cord is damaged, reference contact
information on the back cover of the
INFORMATION CARD for a replacement.
• Make sure the power cord is not
underneath the equipment or in
any other area where it can become
pinched or cut during storage or use.
Clean underneath the equipment:
• Turn off the equipment by unplugging
the power cord from the wall outlet.
• Move the equipment to a remote location.
• Wipe or vacuum any dust particles or
other objects that may have accumulated
underneath the equipment.
• Return the equipment
to its previous position.
• Inspect and tighten all assembly
bolts and pedals on the machine.
• Clean any debris off of the
pedal arms and link arms.
• Lubricate the link arm joint with Silicone
lubricant (included). Apply 1-2 drops on
left and right side of link arm joints.
FREQUENCY
DAILY
WEEKLY
MONTHLY
BI-MONTHLY
15

Publicité

Table des Matières
loading

Table des Matières