Olsberg OEC II Instructions page 21

● Loosen screws on right side panel.
● Remove right side panel.
● The further of the installation is performed as de-
scribed in chapter
PowerSystem II Compact", step 1-4.
● Push the heating gas temperature sensor into the
sensor pocket on the right side of the stove and
screw tight with the sensor sleeve and the union nut.
1.
● The further of the installation is performed as de-
scribed in chapter
PowerSystem II Compact", step 6-14.
2.
"Installation steps Tolima
Heating gas temperature sensor
Sensor sleeve Union nut
"Installation steps Tolima
21