Electronic Oven Controller OEC II
Table of Contents
Foreword ................................................................. 16
Regulations to be observed .................................. 16
Installation ............................................................... 17
Operation ................................................................. 24
Commissioning ......................................................... 25
Power failure ........................................................... 28
What to do if ...? ...................................................... 29
16
Foreword
This electronic oven controller OEC II is a top product
of modern firing technology.
In the OEC II, the combustion air supply is automatical-
ly controlled during the entire combustion cycle and the
convection air output dynamically adjusted depending
on the room temperature.
Through the shut-off of the combustion air supply at the
end of the combustion cycle, heat losses are avoided
during chimney stove downtime.
High operating comfort, low emissions and high fuel
utilisation characterise the mode of operation of the
OEC II.
Proper installation as well as correct handling and
care are vital to trouble-free operation and a long life.
Therefore, please follow all the instructions in this
manual.
Keep this manual on hand so that you can always con-
sult it as to correct operation at the beginning of the
heating period.
If you discover any transport damage, please report
this to your supplier immediately; otherwise there can
be no settlement claims free of charge.
Regulations to be observed
● Local building regulations.
● The OEC II must be connected and put into opera-
tion by a qualified professional.
23/6841.9200