Installation Steps Tenorio Powersystem Compact - Olsberg OEC II Instructions

13
Plug all connecting cables to the electronics.
14 15
19
14 ...Power connection 24V
15 ...Servo motor
16 ...Door contact switch
17 ...Heating gas temperature sensor
18 ...Room temperature sensor (RT­Fühler)
19 ...Servo motor
(cable labelled "Motor-KVL")
14
Screw on the electronics with the console behind
the combustion chamber door respectively the
drawer on the right side.
Note:
When routing the cables, ensure that they are not dam-
aged by moving parts (e.g. door of wood storage com-
partment, drawer under the door of the combustion
chamber) or pulled out of the plug contacts.
Note for Pacaya and Pacaya plus:
Use cable ties to fix all cables in place on the right side
of the unit's interior (see Fig.1, Pos.13 for the holes
necessary to fix the cables in place).
20
16 17
18
Installation steps
Tenorio PowerSystem Compact
● Remove cover hood.