Setting Up A Surveillance Application; Updating The Software Version - Abus eyseo. TV7230 Instructions D'installation

Opening accounts for new users
Under "Configuration", select "Security". Now go to the "Add user" section.
Add an account with user name and password for a second user. You can define up to twenty
accounts for other users of the PAN/TILT network camera. The camera checks only the access
permission of the corresponding user name and password. This means that two or more users can
use the same account at different levels.

Setting up a surveillance application

The administrator can use the built-in motion sensor for monitoring and signalling changes to the
picture. Snapshots of events can be sent to an e-mail address or to an FTP server. For this purpose,
settings have to be made under the configuration points "Network", "Motion sensor" and "Application".
For detailed information, see "System configuration".

Updating the software version

You can download the latest software from the website www.abus-sc.com. A user-friendly update
wizard is provided for updating the PAN/TILT network camera software (Installation Wizard /
Upgrade). Only the administrator can start the update function. To update the system:
1. Download the firmware file with the name xxx.pkg from the corresponding products folder.
2. Start the update wizard and follow the instructions.
3. The complete procedure finishes in a few minutes, and the system is automatically rebooted.
You can also update the software via the menu item Configuration / management of the PAN/TILT
network camera.
If there is a power failure during the write process of the flash memory, the program in the
memory of the PAN/TILT-network camera may be irreparably damaged. If the security network
camera cannot be correctly restarted following the update, consult your dealer's technical support.
18