Etherma LAVA Instructions D'installation Et D'utilisation page 13

W A L L M O U N T I N G
INSTALLING THE DESIGN INFRARED HEATING:
Please inspect the power supply cord to the heater and the
surface before installation. These must not show any signs of
damage.
Fasten hexagon bolts, spacer discs, and the safety plate loosely
on the rear side of the device.
1. Select a position for the mounting brackets according to the
illustrations on page 14, depending on the product type.
2. Drill the holes according to the hole clearances specified on
page 14 (for LAVA BASIC-DM 350-1000 W, the drill template
®
supplied can be used).
3. Screw on the mounting brackets or the retaining hooks using
suitable dowels and screws.
4. Insert the LAVA infrared heating on the mounting brackets
®
or retaining hooks and tighten the screws.
1
!!!
3
8 x
ATTENTION:
Screws and dowels are not included
in the scope of delivery and must correspond to the
construction material of the wall.
ATTENTION: The LAVA
be mounted directly beneath a wall socket.
2
+
+
+
+
+
+
+
+
8 x
4
infrared heating must not
®
13