Etherma LAVA Instructions D'installation Et D'utilisation page 11

O V E R V I E W O F T Y P E S A N D V E R S I O N S
LAVA BASIC-DM
®
The LAVA BASIC-DM is an infrared heating device with a high
®
intensity of radiation. The device is characterized by its ho-
mogeneous temperature distribution and its fast heating re-
sponse. Due to its internal insulation, it heats the room with
a maximum radiation intensity. As a standard, the LAVA
SIC-DM comes with only one connecting cable.
ET-111A RADIO RECEIVER
The radio receiver is fixed to the rear side of the LAVA
BASIC-DM. In connection with an ET-14A, the ET-111A radio
receiver provides for easy switching of up to 10 LAVA
infrared heaters.
S C O P E O F D E L I V E R Y | P A C K A G I N G
The LAVA infrared heating must be mounted exclusive-
®
ly using the fixing components included in the scope of
delivery.
STANDARD SCOPE OF DELIVERY FOR CEILING INSTALLATION
& WALL MOUNTING:
› LAVA BASIC-DM 350-1000 W
®
- 2 x mounting brackets
- 4 x hexagon bolts M8 x 16
- 3 x spacer discs
- 1 x safety plate (only for ceiling installation)
STANDARD SCOPE OF DELIVERY FOR CEILING INSTALLATION & WALL MOUNTING:
› LAVA BASIC-DM 1500 W
®
- 6 x retaining hooks
- 6 x Allen screws
- 1 x Allen key
ET-14A RADIO-CONTROLLED ROOM THERMOSTAT
ET-14A is a radio-controlled room thermostat which is provid-
ed with a clock for measuring the temperature in living spaces
and office spaces and in hotel rooms. Elaborate elevation and
plaster work for cable routing is avoided which allows an easy
installation. The thermostat can be mounted on a flush box or
BA-
®
surface-mounted box on the wall.
WIRED ROOM THERMOSTATS:
Ideal for new buildings and renovation, for example when old
®
night storage heaters, which were controlled by thermostat,
are replaced.
Design
®
Screws and dowels (not included in the scope of delivery) must
correspond to the construction material of the ceiling (mason-
ry, concrete, plasterboard, etc.). The surface of the ceiling and
wall must be even.
11