Pairing Bluetooth-Enabled Devices - Krüger & Matz KM8007 Mode D'emploi

Owner's manual
BLUETOOTH

Pairing bluetooth-enabled devices

Note:
* Pairing needs only to be done once. The operational range is approximately
8 meters.
* Compatibility with all Bluetooth devices is not
guaranteed.
* Any obstacle can reduce the operational range.
1. Press the Bluetooth button
2. Search for other Bluetooth device with your device.
3. Select "KM8007" in the pairing list.
4. Press and hold the Bluetooth button
seconds to clear pairing mode.
Note:
* The devices will disconnect when moved beyond the operation range.
* If you want to reconnect the device to the unit, place it within the operational range.
* The unit support A2DP function.
CLEANING
• Before cleaning the unit, make sure it's fully unplugged from the mains supply.
• To clean the unit, wipe the case with a slightly moist, soft cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
TROUBLESHOOTING
If you are having a problem with your system, check this list for a possible
solution before calling for service.
If you can not solve the problem from the hints give here, or the system has been
physically damaged, call a qualified person, such as your dealer, for service.
No power
● Ensure the mains cable is
connected securely at both ends.
● Make sure that the ON mode is
selected.
on the remote control.
more than 2
Loud hum or noise is heard.
● The plugs and sockets are dirty.
Wipe them with a cloth slightly
moistened with an appropriate non-
abrasive cleaning solution.
19