Pairing Bluetooth-Enabled Devices - Krüger & Matz ODYSSEY Mode D'emploi

BLUETOOTH

Pairing Bluetooth-enabled devices

Note:
• Pairing needs only to be done once. The operational range is approximately 8
meters.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle can reduce the operational range.
1. Press the
the remote control to select Bluetooth mode. The display will show "NO BT" if
the unit is not paired with any device.
Note: if the previously connected mobile device has Bluetooth function on and is
within operational range, this unit will connect to it automatically. To connect with
a different mobile device press and hold the
disconnect from the currently connected device.
2. Activate your Bluetooth device and search for external devices. Connect with
the "KM0547". Note: if you cannot find the unit, press and hold the
button on the remote control to be searchable. The display will show "PAIR" and
you will hear "Pairing" from the unit. Enter default password „0000" if necessary.
3. After successful pairing, the device will issue "Paired" voice prompt and the
display will show "BT".
4. Play music from the connected Bluetooth device.
Note:
• The devices will disconnect when moved beyond the operation range.
• If you want to reconnect the device to the unit, place it within the operational
range.
• If no other Bluetooth device pairs with this player within two minutes, the player
will recover its previous connection.
• If the connected Bluetooth device supports Advanced Audio distribution profile
(A2dp), you can listen to the music stored on the device through the player.
• If the device also supports Audio video Remote Control profile (AvRCp), you can
use the player's remote control to play music stored on the device.
USB
1. Insert the USB device.
2. Press the
the remote control to select USB mode.
3. During playback:
• To pause or resume play, press the
• To skip to the previous/next file, press the
control.
32
button repeatedly on the unit or press the SOURCE button on
button repeatedly on the unit or press the SOURCE button on
/PAIR button on the remote to
/PAIR button on the remote control.
/ buttons on the remote
Owner's manual
/PAIR