Wall Mounting - Krüger & Matz KM8007 Mode D'emploi

WALL MOUNTING

Note: Wall mounting must be carried out by qualified personnel only. Incorrect
assembly may result in severe personal injury and property damage The supplied
wall brackets are only for use on vertical walls suitable from such mounting.
It is the installer's responsibility to verify that the wall will safely support the
total load of the Soundbar and wall brackets. Additional tools required for the
installation are not included. Do not overtighten screws.
1. Parts:
Bracket x 2
2. Drill holes, install dowels B x 2, screws B x 2.
3. Install screws A.
16
Screws A x 4 Screws B x 2
400mm
WALL
Unit
Dowels B x 2
Bracket
Screws A x 4
Owner's manual