Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. CAMERA INSTALLATION
TOP PLACE • HORIZONTAL CAMERA
The camera is positioned on the uppermost part of the body, close to
the horizontal center of the vehicle. The camera is then in horizontal
position. The axis of the threaded rod should be strictly parallell
relative to the ground.
Camera can be placed in 2 positions on the car
GROUND
The spacers provided may be used to correct the curves and angles of the body (see next page).
LOW PLACE • VERTICAL CAMERA
The camera is positioned over the license plate without
obscuring. The camera must be close to the horizontal
center of the vehicle. The camera is then in a vertical
position. The axis of the threaded rod of the camera
must be strictly perpendicular
relative to the ground.
25
GROUND
Publicité
Chapitres
Table des Matières
