Orion Receivers Delivery Confi Guration - Jay Electronique Orion OREL Notice D'installation Et D'utilisation

4.3- Orion receivers delivery confi guration
Transmitter buttons
/ receiver relays
association
(All the default
assignments have
been defi ned using
the identity code :
«ON - ON - ON - ON -
ON - ON - ON - ON»)
Radio channel (1)
Relay operating
mode
Interlocking
of confl icting
commands
(1) = The programming of another radio channel number can only be done with a
transmitter equipped with an «On/Off» button
FR
- 68 -
Receiver on DIN rail ORRD22••• (2+1 or 3 relays) :
- Transmitter buttons B1 and B2 assigned to relays R1 and R2
- «On/R3» relay set for «On» relay»
Receiver ORRS21••• (2 relays) :
- Transmitter buttons B1 and B2 assigned to relays R1 and R2
Receiver ORRS42••• (4+1 relays) :
- Transmitter buttons B1 to B4 assigned to relays R1 to R4
Receiver ORRA82••• (8+1 relays) :
- Transmitter buttons B1 to B8 assigned to relays R1 to R8
Receiver ORRAH2••• (16+1 relays) :
- Transmitter buttons B1 to B16 assigned to relays R1 to R16
Channel nb.17 (434,700 MHz)
«Continuous make contact» Mode
(After having realized a transmitter button / receiver relay
association, when transmitter button is pressed, relay in the
receiver is activated, when button is no longer pressed, the
relay is deactivated)
No interlocking programmed
EN DE
Orion - 324501G