Responsibility Of The Operator; Personnel Qualification - WIKA TC84 Mode D'emploi

3. Safety

3.3 Responsibility of the operator

The system operator is responsible for selecting the thermometer or protection tube, and
for the selection of their materials, so as to guarantee their safe operation within the plant
or machine. When preparing a quote, WIKA can only give recommendations which are
EN
based on our experience in similar applications.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.

3.4 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to
equipment.
▶
Skilled electrical personnel
Skilled electrical personnel are understood to be personnel who, based on their technical
training, know-how and experience as well as their knowledge of country-specific
regulations, current standards and directives, are capable of carrying out work on
electrical systems and independently recognising and avoiding potential hazards. The
skilled electrical personnel have been specifically trained for the work environment they
are working in and know the relevant standards and regulations. The skilled electrical
personnel must comply with current legal accident prevention regulations.
Operating personnel
The personnel trained by the operator are understood to be personnel who, based on their
education, knowledge and experience, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
8
The activities described in these operating instructions may only be
carried out by skilled electrical personnel who have the qualifications
described below.
WIKA operating instructions model TC84