Product Description - Sharp LL-T1520 Mode D'emploi

1. INPUT button . . . . . . . . . . . . . . To switch between the signal's input terminals. (Analogue RGB input
2. MENU button . . . . . . . . . . . . . . . This button is used to pop-up, select and close the OSD (On Screen
3. SELECT button . . . . . . . . . . . . . This button is used to select menu options when the OSD Menu is
4. buttons . . . . . . . . . . . . . . . When the OSD Menu is displayed:
5. Power button
6. Power LED . . . . . . . . . . . . . . . . This LED is lit green when in use and orange when in power-saving
7. Speakers . . . . . . . . . . . . . . . . . . Audio entering via the monitor and the external device connected to
Adjusting the tilt and the swivel of monitor
Lightly holding both sides of the monitor, adjust it
to a suitable viewing angle.
Note:
When adjusting the screen tilt and swivel,
pressure from hands on the LCD panel could
cause damage.

Product description

terminal ↔ DVI-I input terminal)
Display) Menu.
displayed.
These buttons are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness and speaker
volume.
mode.
the monitor can be heard.
10
approx.30°
approx.5°
approx.45°
approx.45°