Product Description - Sharp LL-171A Mode D'emploi

[LL-171A]
6
5
1 2 3 4
1. AUTO button [LL-171A] ........... This button is used to perform automatic adjustment of the screen
INPUT button [LL-171G] ......... To switch between the signal's input terminals.
2. MENU button ........................... This button is used to pop-up, select and close the OSD (On Screen
3. / MODE button ..................... When the OSD Menu is displayed:
4. buttons ............................. When the OSD Menu is displayed:
5. Speakers .................................. Audio entering via the external device connected to the monitor can
6. Headphone terminal ............... Headphones (commercially available) can be connected here.
7. Power button ............................ Pressing this button turns the power on.
8. Power LED ............................... This LED is lit green when in use and orange when in power-saving mode.
9. Main power switch
10. Power terminal
11. Audio input terminal ................ A computer's audio output terminal can be connected here. The audio
12. DVI-I input terminal [LL-171G] ..... The computer's digital RGB output terminal or analog RGB output
(INPUT-2)
13. Analog RGB input terminal ..... The analog signal cable is connected here. The analog signal cable
(INPUT-1)
14. Security lock anchor ................ By connecting a security lock (commercially available) to the security
15. Ventilation openings ................ Never block the ventilation openings as this may lead to overheating

Product description

8
7
5
9 10 11 13 14
(CLOCK, PHASE, H-POS and V-POS). (p.19)
Display) Menu.
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
These buttons are used to select an option or adjust the value of the
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness and speaker
volume.
be heard.
Press the button again to turn the power off.
cable included should be used.
terminal can be connected here.
For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.
included should be used.
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
inside the monitor and result in malfunction.
[LL-171G]
15
6
5
1 2 3 4
10
8
7
5
9 10 11 12 13 14
15