Skil JS313101 Guide D'utilisation page 13

"Lock-on" Button
The "Lock-on" button, located in the handle of your tool, allows for continuous operation at
maximum SPM without depressing the trigger.
If you press the "Lock-on" button while the trigger switch is depressed, the switch will be
locked in the operating position. To release the "Lock-on" button, press and release the trigger
switch (Fig. 5).
Fig. 5
Trigger switch"lock-on" "Lock-on" release
Orbital Action
Fig. 6
0
This saw is equipped with an orbital control that
1
allows you to choose the best cutting action for
2
your material.
Simply turn the lever to the desired position for
the type of cut you are making.
3
Turn the lever to a higher setting to increase
the orbital action. Turn the lever to a lower
setting to decrease the orbital action.
There are four orbital-action cutting settings
that may be chosen, according to different
types of material (Fig.6).
13