Operating Instructions - Skil JS313101 Guide D'utilisation

OPERATING INSTRUCTIONS

Tool-Free Blade Installation
WARNING
parts, making adjustment, or changing blades.
1. Lift the tool-free blade change cover up and
insert the blade (teeth facing the cutting
direction) into the slot of the tool-free blade
change holder (Fig. 2).
2. Release the tool-free blade change cover to
lock the blade in place.
3. Pull down on the blade to verify that the
blade is securely locked in place.
NOTICE: When inserting the saw blade, the
back of the blade must rest in the groove of the
guide roller (Fig. 3).
NOTICE: The tool accepts most commonly
available T-shank and U-shank blades.
4. To remove the blade, lift the tool-less blade
change cover up and carefully remove the
blade.
Variable-speed Trigger Switch
Your tool is equipped with a variable-speed
trigger switch. The tool can be turned "ON" or
"OFF" by squeezing or releasing the trigger.
The speed can be adjusted from the minimum
to maximum nameplate SPM by the pressure
you apply to the trigger. Apply more pressure
to increase the speed and release pressure to
decrease speed (Fig. 4).
12
To prevent personal injury, always disconnect the plug from the power
source before assembling
Fig. 2
Tool-Free Blade
Change Cover
Fig. 3
Blade
Roller
Guide
Fig. 4
Increase
Speed