Festo VNIA-01-ZR Série Instructions D'utilisation page 23

The valve terminal type 14 can be fitted with the following
valve types:
Valve type
VNIA−01...
MN2H... and
JMN2H...
Please note
Use cables from the Festo range for connecting the
valve terminal. Compliance with protection class IP65 is
thus ensured.
Use a uniform method of control. Preferably, all control
signals should be positive−switching (1−switching), other
wise all control signals negative−switching (0−switching).
Festo VNIA−01/02−ZR.. 0403a English
Type of electrical
connection
The solenoid coils of the valve
are supplied via a connection
Central connection on the
valve
4−pin (M8 ) or
3−pin (M12)
Each solenoid coil is con
nected separately
Individual connection on
the solenoid coil
3−pin
Power supply
DC 24 V
DC 24 V
non−standard
voltages:
DC 12 V/AC 24 V,
AC 110 V or
AC 230 V
23