Prior To First Use; Operating The Multicooker - Redmond RMC-M4502A Manuel De L'utilisateur

In accordance with the policy of continuous improvement, the
manufacturer reserves the right to make any modifications to design,
packaging arrangement, or technical specifications of the product
without prior notice.
Device Assembly A1
1. Lid with the removable steam valve
2. Inner aluminum lid
3. Removable bowl
4. Control panel with the LCD
display
5. Stirring paddle
Control Panel A2
1. Use the COOK TIME button to select the hour and minute values in
current time, cook time and TIME DELAY adjustments
2. Use the HOUR/MIN buttons to select the hours and minutes for the
current time, TIME DELAY and COOK TIME
3. Use the TIME DELAY button to enter the current time setting mode,
to select TIME DELAY timer
4. Use the KEEP WARM / CANCEL button to disable the KEEP WARM
function, to disable/reactivate the REHEAT function, to cancel all
programs and settings (except the current time)
5. Use the MENU button to select a program
6. Use the COOK MODE button to select the subprograms
7. Use the SELECT PRODUCT button to select the type of product in
BOIL/STEAM, SAUTE and MULTICOOK
8. Use the TEMPERATURE button to adjust the temperature in
MULTICOOK
9. Use the START button to start the program.
Display A3
1. Selected program indicator.
2. Current time indicator.
3. Cook time indicator.
4. TIME DELAY timer indicator
8
6. Measuring cup
7. Steam tray
8. Serving spoon
9. Power cord
10. Bowl removal tongs
11. Spoon/Paddle holder
5. Product type indicator in STEAM, SAUTE and MULTICOOK
6. Subprogram indicators in the COOK program.
7. MULTICOOK temperature indicator
I. PRIOR TO FIRST USE
Carefully unpack the device, remove all packaging materials and stickers
except the one with the unit's serial number.
The absence of the serial number will deprive you of your warranty benefits.
Wipe all interior and exterior surfaces of the unit with a soft, damp cloth.
Wash the bowl in warm soapy water. Rinse and dry thoroughly. Odor on
first use of the appliance is normal. In such case, clean the device.
CAUTION! Do not use the appliance in case of any malfunctions.
After transporting or storing at low temperatures allow the appliance
to stay at room temperature for at least 2 hours before using.
II. OPERATING THE MULTICOOKER
Before Use
Place the device on a flat, stable, and hard surface away from any objects
or cabinets that could be damaged by steam, humidity, or high temperatures.
Before operating, make sure that the outer and inner parts of the multi-
cooker have no dents, cracks or any other visible damages. There should
not be any obstructions between the heating element and the bowl.
Setting the Clock
1. Plug in the unit. Press and hold down the TIME DELAY button until the
minute indicator starts blinking.
2. Press the COOK TIME button repeatedly to set the minutes in 1 minute
intervals. Hold the button down to scroll through the digits.
3. Press the HOUR/MIN button, hour indicator starts blinking. Set hours using
the COOK TIME button. Hold the button down to scroll through the digits.
4. Press the KEEP WARM / CANCEL button or do nothing for a few seconds
to save your settings. Time indicator stops blinking.