JVC KD-DB98BT Manuel D'instructions page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUDIO SETTINGS
SOUND EFFECT
SPACE ENHANCE
(Not applicable for FM/AM source and DAB source.)
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
SND RESPONSE
LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
SOUND LIFT
LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the
speakers. ; OFF: Cancels.
VOL LINK EQ
ON: Boosts the frequency to reduce the noice heard from outside the car
or running noise of the tyres. ; OFF: Cancels.
K2 TECHNOLOGY
(Not applicable for FM/AM source, DAB source and AUX source.)
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
Speaker output settings
[SPK/PRE OUT]
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY]) ( 19)
Select the output setting for the speakers [SPK/PRE OUT], based on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. ( 30)
Setting on
[SPK/PRE OUT]
FRONT
REAR/REAR (default) Front speakers output Rear speakers output
SUB.W/SUB.W
Front speakers output L (left): Subwoofer
20
ENGLISH
Audio signal through lineout terminal
REAR
Subwoofer output
Subwoofer output
output
R (right): (Mute)
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output. ( 30)
Setting on
[SPK/PRE OUT]
REAR/REAR
SUB.W/SUB.W
If [SUB.W/SUB.W] is selected:
– [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available.
– [POSITION R02] is selected in [FADER] and selectable range is [POSITION
R15] to [POSITION 00].
SW
Audio signal through rear speaker lead
L (left)
Rear speakers output
Rear speakers output
Subwoofer output
R (right)
(Mute)

Publicité

Table des Matières
loading

Table des Matières