ANALOG RADIO
Select a stored station
Press one of the number buttons (1 to 5).
(or)
1
Press
.
2
Press
to select a preset number, then press
Other settings
1
Press and hold
.
2
Press
to select an item (see the following table), then
press
.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
TUNER SETTING
RADIO TIMER ( 6)
SSM
SSM 01–06/SSM 07–12/SSM 13–18: Automatically presets up to 18
stations for FM. "SSM" stops flashing when the first 6 stations are stored.
Select SSM 07–12/SSM 13–18 to store the following 12 stations.
LOCAL SEEK
ON: Searches only FM stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO SET
ON: Improves the FM reception, but the stereo effect will be lost. ;
OFF: Cancels.
8
ENGLISH
NEWS SET *
REGIONAL *
.
AF SET *
TI *
PTY SEARCH *
.
* Only for FM source.
Default: XX
ON: The unit will temporarily switch to News Programme if available. ;
OFF: Cancels.
ON: Switches to another station only in the specific region using the "AF"
control. ; OFF: Cancels.
ON: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if available
("TI" lights up). ; OFF: Cancels.
• [TI] in AM band is for enabling traffic interruption to DAB source only.
Select a PTY code. ( 7)
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.