Product Components - Hach AS1000 Manuel De L'utilisateur

Figure 1 Sampler
1 Lifting module
2 Probe and tubes holder
3 Sample beakers
4 Blue LED (Flashes when the tray is in position 1.
For the remaining positions, the LED is on.)
5 Green LED (ON/OFF indicator LED)
Model
AS1000.XX.20090
AS1000.XX.30050
AS1000.XX.12150

Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
3
Some probes can require a larger minimum sample volume. Make sure that the sensing part of
the probe is fully into the sample during the measurement.
4
Maximum number of tubes (suction tube not included).
5
Maximum number of accepted probes.
Table 1 Instrument configurations
Tray positions Beakers
20 90 mL
30 50 mL
50 mL
12
150 mL
6 Tray
7 Rotating module
8 Magnetic stirrer
9 Power switch
10 Rear panel
Minimum sample volume (mL)
Combined Pt-Pt/ISE
51
21
46
70
Figure 2. If any items are missing or
3 4
Tubes Probes
30 3
11 3
19 4
39 4
English 7
5
1
1
2
2