Belkin OmniView MATRIX Mode D'emploi page 8

F1D208-OSD_EU_man.qxd 4/20/00
Hardware Installation
PLEASE FOLLOW THIS INSTALLATION PROCEDURE EXACTLY. NOT DOING SO MAY RESULT IN KEYBOARD
AND/OR MOUSE ERRORS, OR FAULTY OPERATION.
WARNING: Before attempting to connect anything to the OmniView
make sure everything is powered off. Plugging and unplugging cables may cause irreversible damage
to your computers and the OmniView
damage caused.
1.
Find a convenient place to put your OmniView
mounting to a rack, attach the included brackets to the sides of the OmniView
length of your cables so that your computers, OmniView
distanced properly.
2.
Connect the monitor to the OmniView
monitor, connect it to the HDDB15 female port on the back of the OmniView
with the monitor symbol and is at the CONSOLE A section.
4:37 PM Page 6
™ MATRIX. Belkin Components will not be held responsible for
MATRIX. Its 19" form factor makes it ideal for 19" racks. When
™
MATRIX, keyboards, mice, and monitors are
™
™ MATRIX. Using the attached cable, or the one included with your
6
(continued)
MATRIX or the computers,
™
™ MATRIX. Take note of the
™ MATRIX this part is labeled
Back of OmniView ™ MATRIX