Num'axes PIE1023 Mode D'emploi page 30

Day/Night mode
Infrared flash
Memory
Lens
LCD screen
PIR sensor
Capture modes
Photo resolution
Multi-shot
Picture files format
Video resolution
Video length
Video files format
Trigger time
Camera ID
Time-lapse
Cycle recording
Password
Operation power
Battery type
External power
Stand-by current
Stand-by time
Operating temperature
Storage temperature
Operation humidity
Watertightness
Dimensions
Weight
Free mobile App
(Android/iOS)
10. Troubleshooting
10.1. The photos do not capture subject of interest
− Check the PIR detection sensitivity parameter setting. For warm environmental conditions, set the
sensor detection sensitivity to "High" and for cold weather use, set the sensor detection sensitivity to
"Low".
PIE1023 avec carte SIM NUM'AXES - Indice E – Mars 2022
Yes
58 IR LED | Invisible LED | Wavelength: 940 nm
Flash range: 20 m (65 ft.)
SD card | Capacity from 4GB up to 32GB maximum | Class 10 minimum
F=3.0 | FOV=100° | Auto IR-Cut-Remove (at night)
Built-in 2.0" TFT colour screen | RGB | 262k
Adjustable detection sensitivity: High | Medium | Low
Detection range: 20 m (65 ft.)
Detection angle: 80°
Photo | Video | Photo + Video
5MP (2560 x 1920) | 8MP (3264 x 2448) | 12MP (4032 x 3024)
NUM'AXES SIM card: 1 photo per trigger
Other SIM card: programmable from 1 to 5 photos per trigger
JPEG
VGA (640 x 480) | HD 720p (1280 x 720) | FULL HD 1080p (1920 x 1080)
Programmable from 05 to 59 seconds
AVI
Approx. 0.4 second
Programmable
Programmable
Programmable
Programmable
Batteries: 9V | DC: 12V
12 x AA (alkaline or rechargeable Ni-MH)
12V/2A
0.135mA
Approximately 8 months
-25°C to +60°C
-30°C to +70°C
5% - 90%
IP66
148 x 117 x 78 mm
367g
The PIE1023 trail camera can be remotely configured and triggered via the
mobile application. Application's name: NumCam
30/96