Product Information - Num'axes PIE1023 Mode D'emploi

SMTP/FTP photo size
Sendings/Day
SMS Ctrl
(remote control with
SMS commands sent by
the free mobile App)
Daily Report
Cam PIR
Language
Date/Time
Time Stamp
Battery type
Frequency
Exit
MENU
PIE1023 avec carte SIM NUM'AXES - Indice E – Mars 2022
camera will activate the SIM card automatically during the signal
search.
NOTE:
− The message "Pls input PIN-Code" will pop up again if the wrong PIN
code is entered.
− Please re-try your PIN code if you see the message "Pls input PIN-Code"
again after the signal search.
− A SIM card is normally limited to be activated 3 times; it will be locked
if the PIN codes entered are all wrong during these 3 attempts. So we
suggest you to double confirm your PIN code before you try again.
− Please insert the SIM card into your phone to unlock it by using its PUK
code after 3 unsuccessful activation attempts.
NUM'AXES SIM card
Deactivated parameter | Resolution of photos sent: 640 x 480 pixels
Other SIM card
S = 640 x 480 pixels | L = 1920 x 1440 pixels
You can choose the size of the photos sent via e-mail (SMTP or FTP).
Unlimited | 01 – 99
Example: if Sendings/Day is set to 50, every day, the camera will only send the
first 50 photos to the recipients. The rest of the photos taken that day will not
be sent but they will be stored in the memory card.
By trigger | All the time
− By trigger (suggested for AA battery power): the camera will be able to
change and save the setups remotely when the camera is triggered to
shoot photos/videos.
− All the time (suggested when using a power adaptor as this option will
consume huge battery power): the camera GPRS module is in stand-by
all the time. The camera setups can be changed and saved whenever
you send the remote SMS setup commands.
WARNING: due to a reconfiguration of the FREE networks, the remote control
by SMS with a FREE SIM card in the device works only "By trigger".
OFF | ON
If you want to receive a daily report, select ON to enter then set up a time
when you want the camera to send it to you.
Contents of the daily report: device IMEI number, CSQ (signal strength): 0-31,
camera ID, temperature, date and time, remaining battery power, memory
card info, number of pictures taken, sending times.
3G Other
En
ON
ALK
50Hz
Set
OK
Cam PIR
Cycle recording
Factory settings
Password

Product information

Exit
MENU
3G Other
ON
OFF
OK Set
28/96