Num'axes PIE1023 Mode D'emploi page 27

FTP
Recipients
SIM PIN
PIE1023 avec carte SIM NUM'AXES - Indice E – Mars 2022
− Enter your mailbox port.
Port of most mailboxes is 25.
− Enter your mailbox password access.
NOTE:
‒ SMTP only send photos to pre-set e-mails; if the SMTP information
entered are false, then the e-mail boxes will not be able to receive
photos from the camera.
‒ MMS stops sending photos to e-mail when SMTP is set to work.
ON | OFF
− Enter your FTP server IP.
i.e.: FTP Server IP: ftp://dianwan2008.gipc.net/ - Enter:
dianwan2008.gipc.net
Gmail IP: smtp.gmail.com
− Enter your FTP server port.
Port of most FTP servers is 21.
− Enter your FTP server password access.
NOTE: FTP only upload photos to pre-set FTP account; if the FTP information
entered are false, then the FTP account will not be able to receive photos from
the camera.
NUM'AXES SIM card
Cell phone numbers: deactivated parameter | The NUM'AXES SIM card does
not send MMS.
E-mail addresses: You can enter 1 or 2 e-mail addresses that will receive
photos taken by the device.
Other SIM card
Cell phone numbers: you can enter 1 or 2 cell phone numbers. The camera
will send photos to the pre-set phone numbers via MMS only.
E-mail addresses: you can enter 1 or 2 e-mail addresses. The camera will send
photos to the pre-set e-mail addresses via MMS or e-mail depending on the
chosen settings.
NOTE: the camera will send photos to the pre-set e-mail addresses via MMS
only if the SMTP parameter is OFF.
NUM'AXES SIM card
Deactivated parameter
Other SIM card
You can ignore the description below if your SIM card has been already
activated.
− During the signal search in SETUP mode, the camera will check if the
inserted SIM card is activated.
− After the signal search, the message "Pls input PIN-Code" will appear
on the LCD screen if your SIM card is not activated (the message will
not appear if your SIM card is already activated).
− The "SIM PIN" setting will become configurable in the "3G" page of the
menu.
− Enter the PIN code of your SIM card in the "SIM PIN" setting. The
camera will automatically power off. When you will restart it, the
27/96