EGO CSX3000 Mode D'emploi page 33

STARTING/STOPPING THE CHAIN
SAW
To Start
1. Align the "
plug and the chain saw 's electric
socket, then insert the power plug
into the chain saw until the GREEN
seal on the plug COMPLETELY
disappears into the socket (Fig. 27).
2. Push the "ON/OFF" switch to
position "ON" (Fig. 28).
3. Pull the kickback brake paddle
towards the main handle to the
position.
4. Move the locking tongue forward
and then press the variable-speed
trigger. The more you pull up the
variable-speed trigger, the higher
rotating speed of the saw chain is
(Fig. 29).
To Stop
1. Release the variable-speed trigger
to stop the chain saw.
2. Push the kickback brake paddle
forward to the brake position "
(Fig. 1).
3. Push the "ON-OFF" switch to
position "OFF" (Fig. 30).
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC
" marks on the power
27
Electrical Socket
28
29
Variable-speed Trigger
"
30
Power Plug
"ON" Position
Locking Tongue
"OFF" Position
33