EGO CSX3000 Mode D'emploi page 22

Variable-Speed Trigger
Turns the chain saw On and Off and adjusts the chain speed.
Locking Tongue
Helps to prevent accidental or unauthorized activating of the variable-speed trigger. It
must be folded up before the variable-speed trigger can be activated.
ON/OFF Switch
Turning the ON/OFF switch to "Off" position locks the variable-speed trigger to prevent
the saw from being activated unintentionally.
Kickback Brake Paddle
Serves as the lever for chain brake activation. It also provides protection against
projecting branches and helps prevent the left hand from touching the saw chain if it
slips off the front handle.
Main Handle
For operating, holding and controlling the chainsaw.
Front Handle
For holding, controlling and carrying the chainsaw.
Dust Removal Cover
Use compressed air to blow the sawdust and chips out of the cooling fin.
Side Cover Assembly
Covers the drive sprocket and secures the guide bar.
Oil-Tank Cap
Seals the oil tank. The combi-wrench (provided) can be used to loosen the cap if it's
closed too tightly.
22
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC