Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTROL DISPLAY
Shimano SC-E7000 Unit
Turning Power ON/OFF
The main power can be turned ON/OFF using the battery power button.
Check the following prior to turning the power ON:
– The battery is firmly attached to the battery mount
– The cycle computer is firmly attached to the bracket
Do not place your foot on the pedal when operating the power. Doing so could cause a
system error.
When the main power is turned ON, all components connected to the drive unit are also
turned ON (such as assist driving, cycle computer power, the electronic gear shifting
mechanism, and the lights).
• The power cannot be turned ON while charging.
• If the bicycle is left unused for 10 minutes after turning the power ON, the power
automatically turns OFF. (This is the automatic power OFF function.)
Press the battery power button.
The LED lights up and the battery level is displayed.
EN - 61
Publicité
Table des Matières
