Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTROL DISPLAY
Clearing the traveling distance
You can clear the traveling distance in the main screen. If the battery-powered light is
connected and configured, clear the traveling distance (DST) according to "Clear" in
"About the settings menu".
When using the SC-E6000 this function can only be used when the light is not connected.
1. Change the traveling data display to
DST and press the Assist-A for 2 seconds.
2. Release the finger when the DST
indication starts blinking.
In this state, pressing the Assist-A again
clears the traveling distance.
• The DST indicator light stops blinking and the screen takes you back to the basic screen
after leaving it alone for 5 seconds.
• When the traveling distance is cleared, TIME, AVG, and MAX are also cleared.
46 - EN
Publicité
Table des Matières
