PEDALS
INSTALLING PEDALS
Identify left and right pedal: there
are L" and "R" markings on the axles
(threaded part that looks like a
screw). Apply a small amount of
grease.
Install the LEFT pedal first. Rotate
counterclockwise as threading is
reversed
compared
to
normal.
Tighten hard but without extra force.
Install the RIGHT pedal next. Rotate
clockwise. Tighten hard but without
extra force.
LIGHTS SYSTEM
The headlight and tail light are powered by the rechargeable battery. Always using your
lights will add to your safety since you can also be spottet when stopped. If the electric
drive system switches off because the battery is discharged, you will still be able to use
the lights for at least 1 hour.
To switch the lights ON and OFF, push the following buttons, depending of your control
display:
EN - 17