Spinlock XX Clutch XX0812 Mode D'emploi page 12

ZS Alloy, ZS Carbon and ZS OPEN Jammers
Spinlock ZS Jammers are made from the highest quality materials for durability and low maintenance
in a harsh marine environment.
ZS Jammers are carefully designed for easy and regular servicing at sea. Their life and performance will
be improved if regularly flushed with fresh water.
The jaws can be easily removed for inspection and replacement:
For ZS Alloy and ZS Carbon
For ZS OPEN
compress jaws together and extract sideways.
ZS Alloy, ZS Carbon and ZS Bonded
22
www.spinlock.co.uk
spinlock_hi_load_A5_12_1.indd 22-23
All
silver aluminium showing through.
The white jaw bearings should be lubricated only with silicone grease.
Do not use mineral oil or solvent based lubricants like WD40.
Replacement jaw sets must be installed with grease provided.
For further information and instructions on maintenance of ZS jammers, please refer to the Spinlock
website or contact prosupport@spinlock.co.uk
ZS OPEN
how to use
ZS Alloy / Carbon
pages 8-11
installation spares
23
pages 16-17 pages 36-37
23/11/12 10:24:16