Emerson BUILDER CF700BS09 Manuel Du Propriétaire page 10

BP7312-4 CF700.qxp_ BP7312 2/27/15 5:14 PM Page 10
3.13
Position the switch housing assembly on the switch
housing plate and align the holes in the switch housing
assembly with the holes in the plate.
Secure the switch housing assembly by reinstalling
the three mounting screws (previously removed)
NOTE: Do not pinch wires between the switch
(Figure 12).
housing assembly and the switch housing plate.
You have now completed the assembly of your new
ceiling fan. You can now proceed with hanging and
wiring your fan.
3. Ceiling Fan Assembly
(Continued)
Figure 12
10
SWITCH
HOUSING
ASSEMBLY
MOUNTING
SCREWS (3)
U.L. Model No.: 52-ANT