Klarstein Windwaker B 9 Manuel D'instructions page 50

Step 6: install drain hose
1. Connect the drain hose to the outlet pipe of indoor unit.
2. Bind the joint with tape.
• Add insulating pipe in the indoor drain
hose in order to prevent condensation.
• The plastic expansion particles are not
provided.
Step 7: connect wire of indoor unit
1. Open the panel, remove the screw on the
wiring cover and then take down the cover.
2. Make the power connection wire go through
the cable-cross hole at the back of indoor
unit and then pull it out from the front side..
drain hose
outlet pipe
tape
panel
cable-cross
hole
power connection
wire
drain hose
outlet
pipe
drain hose
insulating pipe
screw
wiring cover
50