Troubleshooting; Check Items - Klarstein Windwaker B 9 Manuel D'instructions

Open panel
1
Pull out the panel to a certain
2
Phenomenon
Indoor unit cannot receive
remote control signal or re-
mote control has no action.
41
3
● Use dust catcher or water to
the water (below 45℃ ) to clean
it, and then put it in a shady
and cool place to dry.
4
panel cover tightly.

Troubleshooting

Check items

Whether it's interfered severely
(such as static electricity, stable
voltage).
Whether remote controller is
within the signal receiving range.
Whether there are obstacles.
Whether remote controller is
pointing at the receiving window.
Is sensitivity of remote control
low; fuzzy display and no
display?
No display when operating
remote control.
Solution
Pull out the plug. Reinsert the
plug after about 3min, and then
turn on the unit again.
Signal receiving range is 8m.
Remove obstacles.
Select proper angle and point
the remote controller at the re-
ceiving window on indoor unit.
Check the batteries. If the power
of batteries is too low, please re-
place them.
Check whether remote control
appears to be damaged. If yes,
replace it.