Klarstein Windwaker B 9 Manuel D'instructions page 52

Step 8: bind up pipe
1. Bind up the connection pipe, power cord and drain hose with the band.
indoor unit
2. Reserve a certain length of drain hose and
power cord for installation when binding
them. When binding to a certain degree,
separate the indoor power and then separate
the drain hose.
3. Bind them evenly.
4. The liquid pipe and gas pipe should be bound
separately at the end.
Notes:
• The power cord and control wire can't be crossed or winding.
• The drain hose should be bound at the bottom..
indoor and
outdoor power cord
gas
pipe
band
drain hose
liquid pipe
connection pipe
indoor power cord
drain hose
band
52