Klarstein Windwaker B 9 Manuel D'instructions page 36

AUTO COOL
2 MODE button
• Press this button can select your required operation mode.
• AUTO: After selecting auto mode, air conditioner will operate automatically according to ambient tem-
perature. Set temperature can't be adjusted and also can't be displayed. Press "FAN" button can
adjust fan speed. Press.
• COOL: After selecting cool mode, air conditioner operates under cool mode. Cool indicator
unit is ON. You can press "+" or "-" button to adjust set temperature. Press "FAN" button can ad-
just fan speed. Press
• DRY: After selecting dry mode, air conditioner operates under dry mode at low speed. Dry indicator
on indoor unit is ON. Under dry mode, fan speed can't be adjusted. Press.
adjust swing angle.
• FAN: After selecting fan mode, air conditioner operates only under fan mode, All mode indicators on
indoor unit is OFF. Operation indicator is on. Press "FAN" button can adjust fan speed. Press
button to adjust swing angle.
• HEAT: After selecting heat mode, air conditioner operates under heat mode. Heat indicator
unit is ON. You can press"+" and "-" button to adjust set temperature. Press "FAN" button to adjust
fan speed. Press
for heating mode.)
Note: For preventing cold wind, after starting up heating mode, indoor fan will blow fan afterdelay-
ing 1-5min. (Details time is decided by indoor ambient temperature) Temperature setting range on
remote controller: 16 °C -30°C. Fan speed setting range: auto, low speed, medium speed and high
speed.
3 + and - button:
• Setting the temperature: After each pressing of "+" or "-" button, it can increase or decrease set tempera-
ture 1 °C . Hold "+" or "-" button, 2s later, set temperature on remote controller will change quickly. After
reaching to your required time, loosen the button. Temperature indicator on indoor unit will also change
accordingly. (Temperature can't be adjusted under auto mode).
• Timer on/off or Clock setting: Press „+" or „-" button to adjust time. (Refer to TIMER button for details)
4 FAN
Pressing this button can set fan speed circularly as: auto (AUTO), low, medium, high
Auto
DRY FAN
and button can adjust swing angle.
button and button can adjust swing angle.
and button to adjust swing angle. (Cooling only unit can't receive the signal
HEAT
and
on indoor
button to
and
on indoor
36