Troubleshooting - Klarstein METROBREEZE 9 PARIS Mode D'emploi

Postseason Storage
1. Unscrew the drainage cover, unplug the water plug, and discharge the water in
the water pan into other water containers or directly tilt the body to discharge the
water into other containers.
2. Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state
until the drainage pipe becomes dry, so as to keep the inside of the body in a dry
state and prevent it from mildewing.
3. Turn off the machine, unplug the power plug, and wrap the power cord around the
wrapping post; install the water plug and the drainage cover.
4. Remove the exhaust pipe and keep it properly.
5. Cover the air conditioning with a plastic bag. Put the air conditioning in a dry
place.
Keep it out of the reach of children, and take dust control measures.

TROUBLESHOOTING

Problems Reasons
The air There is no electricity.
conditioning does
not work.
The overflow indicator
displays „FL".
The ambient temperature is
too low or too high.
In cooling mode, the room
temperature is lower than the
set temperature.
In dehumidification mode, the
ambient temperature is low.
Solutions
Turn it on after connecting it
to a socket with electricity.
Discharge the water inside.
Recommend to use the
of 7-35 ℃ (44-95 ℉).
machine in at the temperature
Change the set temperature.
The machine is placed in
a room with an ambient
temperature of greater than
17 °C(62 °F).
EN
31