Thermostats Assembly (Azce6Bluefacec / Azce6Think [C/R] / Azce6Lite [C/R]); Main Control Board Connection - Airzone EASYZONE Guide Rapide

THERMOSTATS ASSEMBLY (AZCE6BLUEFACEC / AZCE6THINK [C/R] / AZCE6LITE [C/R])

Airzone thermostats are mounted on the wall through a support. It is recommended not to locate it more than 40 meters away
from the main control board. To fix it to the wall, follow these steps:
•
Separate the back part of the thermostat from the wall support.
•
If your thermostat is wired make all the connections, if your thermostat is
wireless insert the CR2450 button battery.
•
Fix the back part of the thermostat to the wall.
•
Place the display on the support once it is fixed.
•
Place the anti-theft rods for additional support (optional).

MAIN CONTROL BOARD CONNECTION

Important: Respect the color code for all the system elements.
No. Description
Airzone connection bus
Wireless module
SW1
Automation bus
AC unit bus
Actuator outputs
Alarm input (normally closed)
Temperature probe
CMV/Boiler
AC Start-stop relay
Power supply
On/Off module
Important: Use a shielded twisted cable to control the
inputs of the On/Off module.
ES
EN
FR
IT
PT
DE
27