Télécharger Imprimer la page

Warnings And Environmental Policy; Precautions; Environmental Policy; General Requirements - Airzone EASYZONE Guide Rapide

Masquer les pouces Voir aussi pour EASYZONE:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39

WARNINGS AND ENVIRONMENTAL POLICY

PRECAUTIONS

For your security, and to protect the devices, follow these instructions:
Do not handle the system with wet or damp hands.
Disconnect the power supply before making any connections.
Take care not to cause a short circuit in any of the system connections.

ENVIRONMENTAL POLICY

GENERAL REQUIREMENTS

Strictly follow the directions outlined in this manual:
This system must be installed by a qualified technician.
Verify that the units to be controlled have been installed according to the manufacturer's requirements and operate
correctly before installing the Airzone System.
Locate and connect all the devices of the installation in accordance with the electronic regulations in force.
Verify that the air conditioning installation to be controlled is in accordance with the regulations in force.
It is necessary to use a Blueface Thermostat to have all the features of the Airzone system.
Follow these recommendations to locate the thermostats:
Perform all the connections with total abscense of power suppliance.
In order to connect the elements of the system, use a proper cable cable: shielded twisted pair cable formed by 4 wires:
2x0,22 mm
+ 2x0,5mm
2
mode.
Do not dispose of this equipment in the household waste. Electrical and electronic
equipment contain substances that may damage the environment if they are not handled
appropriately. The symbol of a crossed-out waste bin indicates that electrical equipment
should be collected separately from other urban waste. For correct environmental
management, it must be taken to the collection centres provided for this purpose, at the end
of its useful life.
The equipment's components may be recycled. Act in accordance with current regulations
on environmental protection.
If you replace it with other equipment, you must return it to the distributor or take it to a
specialized collection center.
Those breaking the law or by-laws will be subject to such fines and measures as are laid down
in environmental protection legislation.
(AWG 20 – 4 wired). The connection between the control modules must be made in Bus
2
ES
EN
FR
IT
PT
DE
23

Publicité

loading