Description; Before First Use - Krups ESPRESSO COMBI XP1600 Mode D'emploi

A Water tank boiler cap:
Open the cover and fill tank with
cool water, then close the cover.
B Control knob:
Control the functions of brewing
espresso, stop brewing and steam.
C Display
C1 Hour screen
C2 Prog button
C3 Coffee button
C4 On/Off
C5 Min setting button
C6 Hour setting button
Please familiarize yourself with all parts of your Krups espresso machine prior to use. Insert
the filter basket into the filter holder, fit the filter holder into the filter rings, remove and
replace the boiler cap. Check the different positions of the switch. To remove any residue
from production which may rest in the appliance, run the machine through one or two cycles
with water only. Wash all loose parts in warm soapy water, rinse thoroughly and dry.
Read all instructions, cautions, notes and attentions before actually using the machine.
!
CAUTION – PRESSURE
!
Never open boiler cap or remove filter holder while your appliance is turned "on" or as
long as there is pressure in the boiler container.
!
Never move or remove the filter holder while the appliance is in operation and under
pressure.
!
Please follow the instructions listed below to see if the machine is still under pressure.
Follow these safety precautions while your machine is in use and ten to fifteen minutes
after last use.
Turn the control knob (B) to the "OFF" position.
Carefully open the steam release knob by turning it counter clockwise. If steam comes out
of the nozzle, then the boiler chamber is still under pressure. Close steam knob and proceed
with instructions listed below.
2. DESCRIPTION :
D
E
F
G
H
I
J
K
L1
L2
M1 Espresso carafe lid
M2 Espresso carafe
N

3. BEFORE FIRST USE

Steam nozzle
Drip tray
Hinged lid
Filter basket
Swing-out filter holder
Non stick coated warming plate
Carafe lid
Coffee carafe
Filter for 2 to 4 cups
Portafilter
Coffee spoon
7