Alarm Codes; Protections - Mase Generators SILENT 5001 DM Mode D'emploi

SILENT
GB
Electric Connections
overheating, make connections with electric wires
having adequate section according to the power of
the generator unit and of the length of connecting
wires.

5.5.4 Alarm Codes

TABLE OF ALARM CODES
CODE CAUSE OF SAFETY INTERVENTION
E - 80
E - 81
E - 82
E - 83
E - 85
E - 86
E - 87
batt
Cod. E 80 – connected to warning light GEN FAIL :
Cod. E 81 - connected to warning light “GEN FAIL” :
Cod. E 82 - connected to warning light “GEN FAIL” :
Cod. E 83 - connected to warning light “GEN FAIL” :
GB
- 88
To avoid tension falling and
Cod. E 85 - connected to warning light “GEN FAIL” :
i
Cod. E 86 - connected to warning light “START FAIL” :
Cod. E 87 - connected to warning light “NO VOLTAGE”
:
Cod. batt - not connected to other warning lights :

6 PROTECTIONS

Low oil pressure
The low oil pressure protection
does not provide any indication as to the oil level. To
prevent damaging the engine, it is essential to check
the oil level periodically.
High engine temperature
Short circuits and overloads