Twin-Star International Duraflame DFI-5010-01 Mode D'emploi page 6

OPERATION INSTRUCTIONS
Function
POWER
FLAME
HEATER
TIMER
A4644
Icon
The power button supplies power to all of the stove
functions. The power button will put the stove in a
standby mode. This will turn off all functions at once, but
will hold the settings in the memory. By pressing the Power
button again, the unit will turn on with the retained set-
tings.
With the power on, press and hold the Power button on
the control panel for 10 seconds to disable or re-enable the
heater function. Once disabled or re-enabled, the ember
bed lights will flash multiple times.
There are 5 brightness levels that can be selected and
OFF (00) setting.
Settings F5 - F1 decrease in brightness.
The stove contains a fan forced infrared element heater.
The thermostat setting range is 62°F - 82°F (17°C - 27°C) or
continously ON or OFF(00).
The thermostat is adjustable by 2°F or 1°C increments by
pressing the HEATER button on the control panel.
To change between °F and °C, press and hold the HEATER
button on the control panel for 3 seconds.
The button on the remote only turns the heater on/off to the
thermostat setting selected with the control panel.
Pressing the timer button will cycle through the timer
settings: 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
9H and off (00).
Description
6
www.tsicustomerservice.com