Installation Instructions; Tools Required For Assembly; Leg Assembly; Care And Maintenance - Twin-Star International Duraflame DFI-5010-01 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION INSTRUCTIONS

Tools Required for Assembly

Leg Assembly

1
Bracket
1. Align the mounting tab into the bracket and
lower the leg into place. (Fig 1)

CARE AND MAINTENANCE

• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
• Citrus oil based products are recommended for cleaning and can be found at supermarkets or hardware stores.
• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electrical shock and injury to persons.
• Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical
shock or personal injury.
A4644
Phillips Head Screwdriver
Leg
2
2. Fasten the leg to the bracket using the included
screws, 3 per leg.
4
www.tsicustomerservice.com

Publicité

Table des Matières
loading

Table des Matières